Dyer Vent Cleaning - preclude a Fire by Cleaning Your Dryer Vent

Dyer Vent Cleaning - preclude a Fire by Cleaning Your Dryer Vent,

Did you know--- Only 60% of the lint is captured in the lint trap of residential and market clothes dryers. The other 40% is vented outside. Over time, the damp lint accumulates to the inside of the duct. The succeed is like a clogged pipe that becomes more restricted over time which can cause a fire hazard! according to the National Fire security Association, 16,000 fires start in the laundry room each year.

Also, the buyer stock security Commission estimates more than 84.4 million in property damage annually. This is a reality that needs to be taken seriously. The State Fire Marshal recommends that your dryer vent be cleaned or inspected once a year to ensure your safety.

Related Dyer Vent Cleaning - preclude a Fire by Cleaning Your Dryer Vent.

Recommend Dyer Vent Cleaning - preclude a Fire by Cleaning Your Dryer Vent.

Here are some signs your dryer vent might need cleaning:

If it takes longer than one cycle for your clothes to dry, or the clothes are very hot after drying, this is a good sign your vent needs cleaning. If the clothes have a musty smell after drying. If your dryer shuts off or stops while a cycle, the element may be getting too hot from the duct restriction. If there is a great deal of lint escaping from the back of the dryer. If the surface vent has lint surface the surface of the vent cover.
Here are the benefits of a clean dryer vent:

Reduce laundry drying times Avoid dryer element change costs Improve the ability of dried clothes Save money on utility bills Prevent a dryer fire! So, how do you go about cleaning your dryer vent. Here are the steps if you plan to do it yourself.

1. Get the right tools. For this job you will need a shop vac and postponement hose of at least 10 to 15 feet, depending on the distance of the dryer vent surface to your dryer. Next, you will need a flexible cable with a brush on the end (can be found online) to snake straight through the duct, and finally, a dust mask and gloves to protect yourself from the airborne lint.

2. Disconnect your dryer from the flexible duct and clean the back of the dryer and any lint that has accumulated under the dryer. Check the flexible duct and replace it with a new one if it is damaged or has holes. The first part of the process will involve running the flexible cable and vacuum from the inside of the house by your dryer. The second part of the process involves the same thing only from the surface by your dryer vent that goes to the outside.

3. Run the flexible snake with brush straight through the dryer vent duct as far as you can go, be faithful not to push past any turns or angles that might cause the cable to get stuck in the ductwork, otherwise you will have a difficult time getting it out. Vacuum out the loose lint with the shop vac and hose. Run the hose as far into the duct as you can go.

4. search where your dryer vents to the surface of the house. Remove any dryer vent hardware to entrance the duct.

5. Repeat the process from the outside, running your flexible cable into the duct (toward the dryer) and vacuum out the loose lint. succeed this by hooking the dryer back up to the flexible duct inside the house and turn the dryer on, any remaining lint will blow out of the duct. Finally, replace any hardware on the surface of the house.

You may be surprised by the estimate of lint you vacuum out. In some cases you might Remove any Pounds of lint. In any case, you will save yourself the occasion of a fire disaster, and keep your dryer running smooth for years to come.